產品留言

電池內短路試驗機 Battery Internal Short-Circuit Tester

一、相關標準測試要求 Test requirements

1.IEC62133-2012

二、主要技術參數 Main Technical Parameters

 

型號 Model	PNDL-225
溫度箱參數Temperature Chamber Technical Parameters	溫度范圍Temperature Range	-10℃ ～ +80℃（可調）（Controllable）
	升溫速率Temperature Rising Rate	平均3℃/min（從-10℃升到80℃、非線性空載）Ave.3℃/min（-200℃ to 100℃、Nonlinear No-load）
	降溫速率Temperature Cooling Rate	平均1℃/min（從80℃降到-10℃、非線性空載）Ave.1℃/min（100℃to -20℃、Nonlinear No-load）
	內箱尺寸Inner Chamber Dimension	W600 X H750 X D500 MM
	外箱尺寸External Chamber Dimension	W1170 X H1850 X D1020MM
	內箱材質Inner Chamber Material	鏡面不銹鋼板,底部補強Mirror stainless steel with bottom reinforcement
	外箱材質External Chamber Material	冷軋鋼烤漆處理Cold-Rolled Steel with paint-baking treatment (gray-white color)
	觀察窗 Observation Window	單開門上附有發熱防汗3層真空大玻璃觀察視窗(W430mm xH 580mm); 門框備電熱（自動調節）防結霜、防凝露裝置；使您在任何時候都可以通過觀察窗清晰地觀察箱內供試樣品的試驗狀況The single-opening door is accompanied by a 3-layer vacuum large glass observation window (W430mm x H 580mm); The door frame is equipped with electric heating (automatic adjustment) anti-frost, anti-condensation device; so that you can clearly observe the Test status of the test sample in the box through the observation window at any time.
內短路主要技術參數 Technical Parameters	*大載荷 Max. loading	200KG
	值解析度Resolution	1/10000
	力值精度 Force accuracy	≤0.5％
	位移解析度Displacement resolution	1/1000
	位移準確度Accuracy of displacement	≤0.5％
	速度范圍 Speed range	0.01－5MM/S
	有效行程 Effective Range	0 ~ 200mm
	測試*大平面 Max. test plane	300X300MM（特殊測試寬度亦可依客戶需求定制） 300X300MM Can be customized
	電壓采集范圍 Voltage range	0—60V
	電壓分辨率 Voltage resolution	5mV
	電壓采集頻率Voltage acquisition frequency	100HZ
控制系統 Control system	伺服電機+伺服控制系統 Servo motor + servo control system
安全防護裝置Safety protection device	Explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, safety stop switch